Borderless Printing By Resizing Originals To Fit The Roll Width (Mac Os X) - Canon imagePROGRAF iPF6400 User Manual

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following
example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Holder.
(See " Loading Rolls on the Roll Holder
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
Important
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
• Paper: Roll
• Paper type: Canon Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
1
Choose Page Setup from the application menu to dis-
play the Page Attributes dialog box.
2
Select the printer in the
3
C
In Paper Size, click the size of the original. In this case, click ISO A4.
•
Note
4
F
Click OK to close the dialog box.
5
In the application, create an original that takes up the entire space of the paper size.
6
Choose Print in the application menu.
106
→P.531
B
Format for list.
All sizes are available in borderless printing if you resize originals to fit the roll width.
")
iPF6400
User's Guide