Icc Conversion Options Dialog Box - Canon imagePROGRAF iPF6400 User Manual

iPF6400
The following settings are available for the image enlargement method.
Setting
Nearest Neighbor
Bilinear
Bicubic
• Close Plug-in After Printing
When you place a checkmark here, the plug-in closes after printing finishes.
•
If printing does not finish correctly because it was canceled or an error occurred, the plug-in does not close.
Note
• Initialize all warning dialog boxes
When this is checked, all of the warning dialog boxes that have been set to "Do not show this screen again" be-
come displayed.

ICC Conversion Options dialog box

ICC Conversion Options dialog box

This is displayed when an ICC profile is selected in the Output Profile list in the Main sheet and the ICC Conversion
Options button is clicked. This allows you to configure detailed color matching related settings.
• Conversion Engine
Selects the conversion engine to use when converting colors.
•
Adobe CMM needs to be installed in order to use Adobe CMM. Refer to Using Adobe CMM
to install Adobe CMM.
Note
• Black Point Compensation
Check this check box to perform black point compensation. Loss of gradation in dark areas can be improved by
performing black point compensation.
•
This can be used if Adobe CMM is selected as the Conversion Engine.
Note
• Proof Options
Configures settings related to printing press simulation.
The proof options consist of the following settings.
Setting
Simulate Paper Color
User's Guide
Performs simple enlargement.
Performs line vector enlargement.
Adjust pixels with calculation of elements such as a color or brightness of neighboring pixels.
Select this when performing paper color simulation. When this is on, Simulate Black Ink is auto-
matically turned on and becomes grayed out.
ICC Conversion Options dialog box
Details
for details on how
→P.291
Details
277