Table of Contents
Advertisement
Setting a new preset position
1.
Move the camera to a position using direction buttons (⑤).
2.
Select the preset number to set using button (⑨).
3.
Click button ⑪ "SET".
4.
Repeat steps 1 ~ 3 to set other preset positions.
※ You can set up to 10 preset positions.
※ Not all cameras are compatible with presets. Check your camera's manual.
Moving camera to preset position
1.
Select the preset number to move using button (⑨).
2.
Click on the "GO" button (⑩)
※ Moving camera to preset position is only available when the camera supports
preset feature.
Deleting preset position
1.
Select the preset number to delete using preset number button ⑨.
2.
Click button ⑫ "CLEAR".
※ Deleting preset position is only available when the camera supports.
Starting touring
1.
Click button ⑬ "START".
2.
Then it will start traversing each preset position one by one.
Stopping touring
1.
Click button ⑭ "STOP".
2.
Then it will stop touring.
Notice
If you change a preset position whilst in Touring mode, the
touring will automatically stop.
46
U
'
M
SER
S
ANUAL
H.264 R
T
DVR
EAL
IME
Advertisement
Table of Contents
