Table of Contents
Advertisement
[F/W Update]
③
This is where you can execute a Firmware Update.
Don't update your firmware unless instructed to by Swann technical support.
A. FILE: You can specify the firmware file to update to using the ◀ / ▶ buttons.
[Setting update]
④
A.
IMPORT: You can replace current setting values with new values from USB memory.
(OFF/ON)
B.
EXPORT: You can export current setting values to USB memory.
(OFF/ON)
Notice
A compatible USB flash drive is required to update F/W or settings.
It can take a few seconds to for the DVR to recognize a USB memory
device after it has been connected.
If the DVR shows the message "USB is not detected" this indicates that
either the USB drive is not present, or it is not functioning properly.
26
U
'
M
SER
S
ANUAL
H.264 R
T
DVR
EAL
IME
Advertisement
Table of Contents
