The Pin Control Page - Zoom 3G+ Modem/Router User Manual

The Pin Control Page

Your service provider may provide you with a pin code to protect your SIM card from
unauthorized use or you may want to request a pin code from your service provider if
you are concerned about your SIM card being removed from your Modem/Router and
used with another device without your permission.
To use a pin code with your Modem/Router click Enable next to the PIN CODE
Request function and enter the 4 digit pin code given to you by your service
provider. For security reasons, you are only allowed 3 attempts to enter your pin code
correctly. If you fail to enter your pin code correctly after 3 attempts, you will be asked
to enter a PUK code. If you are prompted for a PUK code you must call your service
provider and request the PUK code from them. This is done to prevent unauthorized
users from guessing your PIN code.
If you want to change the 4 digit pin code given to you by your service provider click
the Change PIN Code button.
Note: After you enable the pin code, you do not need to enter it each time you use the
Modem/Router. You would only need to enter the pin code if you reset the modem
using the reset button on the front panel or if you restored the modem to factory
defaults by using the Reset to Default command on page 87.
Chapter 7: Using the Configuration Manager's Advanced Program 85