Table of Contents
Advertisement
Your 3G+ Modem/Router with Wireless-N and Phone Port can be used to send and
receive text messages. This chapter shows you how to use your Modem/Router to
send a text message and how to manage your received text messages. This chapter
also describes how you can send text messages to your 3G+ Modem/Router's to
check its status and to control its Internet connection.
Using your Modem/Router to Send Text Messages
If you want to use the Modem/Router's built-in 3G+ modem to send text messages
and you are connected to the Modem/Router through your computer's Ethernet port,
you can go right ahead and log into the configuration manager. If you are using a
wireless connection to access the Modem/Router, you must first establish the
wireless connection. If you are unsure how to set up a wireless connection, see
Establishing your Wireless Network
1
Turn on your computer and Modem/Router, then launch the computer's Web
browser.
2
In the Web browser address bar, type the Modem/Router's default IP address,
http://192.168.2.1 and then click Enter.
When the MAIN MENU opens for the first time, it displays a System Status
page that summarizes the current settings and values for your system.
3
On the Toolbar, type admin (the default password) in the System Password
field, then click Login.
Note: If you have changed the System Password, you will use the new password
to log in.
4
When you log in, the Configuration Manager opens its Main Menu. Select
Text on the top menu.
Chapter 6: Working with Text Messages
Working with Text Messages
on page 28.
6
45
Advertisement
Table of Contents
