Table of Contents
Advertisement
Using the Modem/Router's Configuration
The Modem/Router includes a built-in Install Wizard that walks you through
configuring the Modem/Router's software. For most users running the Install Wizard
is all that is needed to configure the Modem/Router. If you are experienced with
networking devices and their configuration, you may prefer to use the Advanced
Configuration program to tailor the Modem/Router's configuration to your needs. In
that case go to
Using the Configuration Manager's Advanced Program
Launching the Modem/Router's Configuration Manager
To launch the Configuration Manager, please follow these steps:
1
If you haven't already done so, plug the supplied Ethernet cable into the
Ethernet port on the Modem/Router's back panel and into your computer's
Ethernet port.
2
Turn on your Modem/Router first, then your computer. Once the computer is
on, launch the computer's Web browser.
3
In the computer's Web browser address bar, type the Modem/Router's default
IP address, http://192.168.2.1 and then press Enter.
When the USER'S MAIN MENU opens for the first time, it displays a
System Status page that summarizes the current settings and values for
your system. If the Status page doesn't appear, please see
Troubleshooting
10
Tips.
3G+ Modem/Router with Wireless-N and Phone Port User Manual
3
Manager
on page 53.
Appendix B:
Advertisement
Table of Contents
