Basic Settings
Press and hold SELECT for 5 seconds to
access the settings menu. Press
scroll through the menu options. To exit menu
mode at any time, press EXIT.
Set the Display Language (Initial Setup Only):
Note: After you set a language initially, the language setting is
hidden unless you reset the radio (see
"Reset" on page 16).
1. Access the settings and scroll to
.
SET LANGUAGE
2. Press SELECT and wait for 5 seconds.
3. Select a language (
ENGLISH
,
) and press SELECT.
FRENCH
Set the Clock
1. Access the settings and scroll to
.
SET CLOCK
2. Press SELECT and wait for 5 seconds.
The time appears.
3. Use
and SELECT to set the hour,
Select a Channel
To select a channel:
1. Access the settings menus and scroll
to
.
SELECT CH
2. Press SELECT and wait 5 seconds.
appears.
3. Use
or
to scroll through channels 1-7.
or
to
SET LANGUAGE
SPANISH
,
ENGLISH
SET CLOCK
CLOCK 12:00
SELECT CH
CH X
CHANNEL
CH 1
8
Program State and County
1. Access the settings and scroll to
.
LOCATION
2. Press SELECT.
3. Select a memory location (1-20) and
press SELECT.
To receives
all SAME
alert signals
broadcast
within about a
50-mile radius:
To select your
state and
county from a
list:
A
M
To manually
enter a FIPS
code:
LOCATION
MEMORY
MEMORY 1
appears.
MEMORY 1
STATE
1 SEL STATE
appears.
SEL STATE
ALL
Scroll to
and press
SELECT.
1. Scroll through individual
state names. When your
state appears, press
SELECT.
SEL COUNTY
appears.
2. Scroll through individual
county names. When your
county appears, press
SELECT.
1. Scroll to
MANUAL ENTRY
and press SELECT. A set
of bars appears.
2. Use
/
and SELECT to
enter the code.
9
STATE
ALL
STATE
Alabama
COUNTY
1 SEL COUNTY
STATE
MANUAL ENTRY
STATE
984
===