Empty Key - Aastra 9480i User Manual

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do
this by setting the softkey to "empty". The softkeys are added in order (from softkey1 to
softkey20) after any hard-coded keys have been added. If a particular softkey is not defined, it is
ignored.
Configuring an Empty Key
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 9480i phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Empty.
4. Check (enable) or uncheck (disable) the states you want to apply to this softkey.
5. Click Save Settings.
126 Model 9480i IP Phone User Guide