None Key - Aastra 9480i User Manual

None Key

You can set a key to force a blank entry on the IP phone display for a specific key. You do this by
setting the key to "none". The keys are added in order (from key 1 to key 20) after any hard-coded
keys have been added. If a particular key is not defined, it is ignored. For more information about
key behavior, see "Key Display Behavior" on page 65.
Configuring a None Key
Aastra Web UI
Use the following procedure to configure a None key on the 9480i IP Phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select None.
4. Check (enable) or uncheck (disable) the states you want to apply to this softkey.
5. Click Save Settings.
Model 9480i IP Phone User Guide 125