Roland VS-1824 User Manual page 119

Parameter Table (Mastering Track)
fig.5-22
Mastering
Track Switch
Off
Record wait Status
Playback Status
4
Move to the location at which you started the mixdown.
5
Press [ ] so that you can view the playlist of the mastering
tracks.
6
Press [PLAY]. The mastering tracks will play back. Use the
master fader to adjust the volume to a comfortable listening
level.
At this time, the function buttons will function as follows (Owner's Manual,
p. 40, 180).
[F1 (ZOOM+)]: Enlarges the playlist in the track direction (three levels).
[F2 (ZOOM-)]: Reduces the playlist in the track direction (three levels).
)]: Enlarges the playlist in the time direction (five levels).
[F3 (
[F4 ( )]: Reduces the playlist in the time direction (five levels).
[F5 (WAVE)]: Display the sound level (waveform) that is recorded in the tracks.
7
When playback ends, press [STOP].
Signal Flow (Routing)
fig.5-17
Track 1—16
TR1
Mastering
Track Status
Rec
Off
On
Rec
On Play
MIX
Mastering
L R
Track
MST TR L
MIX
Sw
MST TR R
Add Finishing Touches to Your Song
MASTER OUT
MONITOR OUT
MASTER
If the bottom line of the
display is surrounded by a
heavy line, you can also use
the TIME/VALUE dial to
check the playlist of the
mastering tracks.
The tracks 17 and 18 fader
has no effect on the volume
level of the mastering
tracks.
119