Panel Description - Roland Cakewalk MA-7A Owner's Manual

Panel Description

Left Channel
fig.left.eps
Left Channel
1.
L Channel Input Jack
Connect this to L channel output jack
For the connection, use the included speaker cable.
Right Channel
2.
STANDBY Switch
3.
STANDBY Indicator
When the STANDBY switch is turned on, the STANDBY indicator
lights, indicating that the unit is ready to produce sound.
4.
PHONES Jack
This is the jack for connecting headphones.
When you connect headphones to this jack, no sound will be heard
from the speakers.
5.
VOLUME Knob
This adjusts the volume of devices connected to Line INPUT jack
(11)
LINE 1 input jack , and LINE 2 input jacks
6.
BASS ENHANCER Indicator
This lights when the BASS ENHANCER switch
the function on.
7.
BASS Control Knob
BASS ENHANCER Switch
Switch this on to boost the bass range.
The BASS ENHANCER indicator lights when this is turned on.
With the switch in the OFF position, sounds are output without the
effect applied.
1
(14)
on the right-side unit.
(9)
,
(12)
.
(7)
is pressed to turn
Right Channel
fig.right.eps
2 3 4 5 6 7 8 9
8.
TREBLE Control Knob
These adjust the tones of the bass and treble. Set to center to make
the tones flat.
9.
Line INPUT Jack (stereo mini type)
The signals from both inputs are mixed when devices are connected
simultaneously to the LINE 1 input jack
(12)
on the rear panel.
10.
AC Inlet
Connect the included power cord here (p. 7). Plug it firmly in, so that
the cable does not accidentally become disconnected.
11.
LINE 1 Input Jack (stereo mini type)
The signals from both inputs are mixed when devices are connected
simultaneously to the front panel's Line INPUT jack
(12)
panel's LINE 2 input jacks
12.
LINE 2 Input Jacks (L, R) (RCA phono type)
The signals from both inputs are mixed when devices are connected
simultaneously to the front panel's Line INPUT jack
(11)
panel's LINE 1 input jack
13.
SUB-WOOFER Output Jack
Connect your sub-woofer here. Obtain separately any sub-woofer
you wish to connect and use.
14.
L Channel Output Jack
Connect this to L channel input jack
10 11 12 13 14
(11)
and LINE 2 input jacks
(9)
and the rear
.
(9)
and the rear
.
(1)
on the left-side unit.
5