Panel Description; Left Channel; Right Channel - Roland Edirol MA-7A Owner's Manual

Panel Description

Left Channel

fig.2
Left Channel
1. L Channel Input Jack
Connect this to L Channel Output Jack 14 on the right-
side unit. For the connection, use the included speaker
cable.

Right Channel

2. STANDBY Switch
3. STANDBY Indicator
When the STANDBY Switch is turned on, the STANDBY
Indicator lights, indicating that the unit is ready to
produce sound.
4. PHONES Jack
When you connect headphones to this jack, no sound
will be heard from the speakers.
5. VOLUME Knob
This adjusts the volume of devices connected to LINE
Input Jack 9, LINE 1 Input Jack 11, and LINE 2 Input
Jacks 12.
6. BASS ENHANCER Indicator
This lights when the BASS ENHANCER Switch 7 is
pressed to turn the function on.
7. BASS Control Knob
BASS ENHANCER Switch
Switch this on to boost the bass range.
The BASS ENHANCER Indicator lights when this is
turned on.
With the switch in the OFF position, sounds are output
without the effect applied.
6
Right Channel
fig.3
1
8. TREBLE Control Knob
9. LINE Input Jack (stereo mini type)
10. AC Inlet
11. LINE 1 Input Jack (stereo mini type)
12. LINE 2 Input Jacks (L, R) (RCA phono type)
13. SUB-WOOFER Output Jack
14. L Channel Output Jack
2 3 4 56 7 8 9
These adjust the tones of the bass and treble. Set to center
to make the tones flat.
The signals from both inputs are mixed when devices are
connected simultaneously to the LINE 1 Input Jack 11
and LINE 2 Input Jacks 12 on the rear panel.
Connect the included Power cord here (p. 17). Plug it
firmly in, so that the cable does not accidentally become
disconnected.
The signals from both inputs are mixed when devices are
connected simultaneously to the front panel's LINE
Input Jack 9 and the rear panel's LINE 2 Input Jacks 12.
The signals from both inputs are mixed when devices are
connected simultaneously to the front panel's LINE
Input Jack 9 and the rear panel's LINE 1 Input Jack 11.
Connect your sub-woofer here. Obtain separately any
sub-woofer you wish to connect and use.
Connect this to L Channel Input Jack 1 on the left-side
unit.
10 11 12 13 14