Roland Cakewalk MA-7A Owner's Manual page 8

Connections
Attaching the Rubber Feet
(Included)
fig.foot.eps_108
Connection Example
fig.connect-e.eps
INPUT
(FROM RIGHT)
L
Computer, WAVE/MP3 Recorder,
USB Audio Interface, etc.
6
OUTPUT
(TO LEFT)
OUTPUT
Precautions Concerning
Connections and Initial Use
921
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on all
devices before making any connections.
926a modify
• Using a connection cable that contains a resistor can cause the
sound level to be low. Use a connection cable that does not contain
a resistor.
941
• Once the connections have been completed, turn on power to your
various devices in the order specified. By turning on devices in the
wrong order, you risk causing malfunction and/or damage to
speakers and other devices (reverse the procedure when turning off
the STANDBY switch).
<Connected devices ➝ MA-7A>
942
• This unit is equipped with a protection circuit. A brief interval (a few
seconds) after the STANDBY switch is turned on before the unit is
ready normal operation.
945
• If you need to turn off the power completely, first turn off the
STANDBY switch, then unplug the power cord from the power
outlet. Refer to "Power Supply" (p. 4).
R
Rear Panel