Playing Back Songs On A Usb Storage Device - Roland VIMA JM-8 Owner's Manual

Multifunctional entertainment station
Table of Contents

Advertisement

(5) Press the [®÷π] button to start playback.
The main page shows the current playback position.
(6) Press [®÷π] again to temporarily pause playback.
Press it again to resume playback.
(7) Press the [ª] button to stop playback.
If you press [®÷π] after pressing [ª], the song plays
back from the beginning.
Use the [º] and [‰] buttons to rewind or fast-for-
ward.
(8) Press the EJECT button to remove the CD when you
are finished.

Playing back songs on a USB storage device

After a brief interval, the CD will be ejected. The CD
icon is grayed out to indicate that the CD player is no
longer available.
If you are unable to remove the CD
If the CD is not ejected when you press the EJECT
button, switch off the power to the JM-8 and the CD
drive, insert a straightened paper clip or similar
object into the emergency eject hole below the slot
and press several times until you can remove the CD
by hand.
Emergency eject hole
Note: The emergency eject hole must be used only when
the JM-8's power is switched OFF. Using it while the power
is on may damage the disc or cause serious problems.
Playing back songs on a USB
storage device
Here's how you can listen to songs that are saved on a
USB storage device (sold separately).
(1) Connect the JM-8 to an audio system (or connect a
pair of headphones) and switch it on (see p. 18).
(2) Connect the USB memory containing the song you
want to listen to the EXTERNAL MEMORY port on
the front panel.
(3) If necessary, press the [EXTERNAL] display button.
Note: The [EXTERNAL] display button is active when a stor-
age device is connected to the EXTERNAL MEMORY port.
r
VIMA JM-8
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents