Roland VIMA JM-8 Owner's Manual page 108

VIMA JM-8
V-LINK function
(3) Press the display field that corresponds to the MIDI
message for which you want to select another
control function.
MIDI message
Pitch Bend Change
Cutoff Frequency
Expression
(4) Use the dial to select one of the following options:
Function
ANIME Control1
ANIME Control2
ANIME Control3
ANIME Control
Mode
108
Meaning
Pitch bend messages received
from the external keyboard (or
MIDI controller).
CC74 messages received from the
external keyboard (or MIDI con-
troller).
CC11 messages received from the
external keyboard (or MIDI con-
troller).
Meaning
The animation follows the direc-
tion in which the pitch bend lever,
knob, slider or pedal is moved (left
or right).
If a slider is used, upward move-
ments will cause picture move-
ments towards the right, while
downward movements produce
picture movements towards the
left.
Any movement of the lever, knob,
slider or pedal produces picture
movements towards the left.
Any movement of the lever, knob,
slider or pedal produces a change
in color.
Changes the direction of the
effect being used. It must be used
together with an "ANIME Control"
option (see above). For "ANIME
Control 3", this changes the color
between "lively" and "dim".
(5) Press the [EXIT] button repeatedly until it stops
flashing to return to the main page.
(6) Connect an external keyboard to the JM-8
(page 104).
(7) Connect an external monitor or screen (page 16).
(8) Set the JM-8's MIDI RX channel to "16" (page 105).
(9) Select MIDI channel "16" as transmission channel
on your external MIDI controller.
(10) Switch on the JM-8's [ANIME] button.
(11) Select an ANIME pattern by pressing a key in the
A0~G#1 range or by transmitting a program
change number (1~12).
(12) Transmit pitch bend, CC74 or CC11 messages to
control the ANIME effect in realtime.
The animation will follow the rhythm of your playing.