Planar PT1510MX User Manual page 26

PT1510MX Optional Resistive Calibration Tool Install:
If you would like to use the Optional Resistive Calibration Tool, follow the
instructions below:
1. Open the CD-Rom.
2. Select the Monitor Size and then Model Name
3. Click on the "Load Utility" button that appears to the right of the
Model Name.
4. The HID calibration tool will automatically open. From here the user
can choose to do the following:
a. 4 Points Calibration
b. 9 Points Linearization
c. 25 Points Linearization
d. Clear
e. Draw Test
f. Advanced. In the Advanced settings area the user may do
the following:
i.
ii.
iii.
iv.
Adjust the Double Click Area
Enable auto right click and adjust the auto right click
time
Choose to be either in the HID Mouse Mode or HID
Digitizer Mode (Windows
Simply click the "Apply" button once the settings are
finalized.
®
Vista only)
22