Installing The Tape Drive - Fujitsu PRIMERGY RX600 S5 Options Manual

Installing the tape drive

7.2 Installing the tape drive
Figure 27: Fastening the sliding rails to the drive
Ê Fasten the two sliding rails on both sides of the drive to be installed using
two screws for each.
Figure 28: Inserting the tape drive
Ê Push the tape drive into the empty bay until it snaps into place.
I
Make sure the tape drive has completely snapped into place.
When inserting the tape drive, make sure you do not damage or
accidently disconnect the cable of the local service display.
50 Options Guide
Tape drives
RX600 S5