Step 2 : Import The Image - Roland Metaza MPX-80 User Manual

˜
Important !
For printing on a flat plate, make the margin at least one millimeter. Otherwise the marking pins may strike and
damage the edge of the material.

Step 2 : Import the Image

Here you import the image to print. Prepare an image file to import.
P. 30, "Preparing the Image"
Procedure
–
3-6 Creating Printing Data (Printing on Flat Material)
Make the setting for the margins.
Click [File], then click [Preferences].
The [Preferences] dialog box appears.
Set "Margin" to "1 mm."
(This is set at 1 millimeter by default.)
Click [OK].
Click .
The [Import] dialog box appears.
Chapter 3 Performing Printing 37