Maintenance Of The Head And The Marking Pins; Starting Mpx-80 Head Manager - Roland Metaza MPX-80 User Manual

5-2 Maintenance of the Head and the Marking Pins

You perform all head cleaning and maintenance of the marking pins using the included MPX-80 Head Manager
program.
The machine's head has nine pins. Printing is performed using these pins one at a time. If the tip of the pin in use
becomes worn, you can change the pin used for printing. You can also perform adjustment to ensure that each pin uses
the same striking force.

Starting MPX-80 Head Manager

–
—
70 Chapter 5 Maintenance and Adjustment
Click [Start], then click [All Programs]
(or [Programs]).
Click [MPX-80 Head Manager], then
click [MPX-80 Head Manager].
Switch on the power to the machine.