Heat & Glo 6000GLX-IPI-R Owner's Manual page 55

Figure 14.11 Front View Figure 14.11 Front View
STEP 4. Log #2 NG (SRV2101-086): Log #2 LP (SRV2101-088):
shutter in the end of the burner tube goes over the right brass orifi ce located behind the main burner. The right end of the
log goes tight against the right refractory wall.
Figure 14.13 Front View Figure 14.13 Front View
STEP 5. Log #3 (SRV2101-197):
the hump and the "V" notch in the bottom of the log rests into the second grate tine from the left.
Figure 14.15 Front View Figure 14.15 Front View
STEP 6. Log #4 (SRV386-716):
that goes over the tab molded into the top of log #2. The other end of the log rests in the fl at area on top of log #3.
2 2
3 3
Place log #3 on top of the burner surface in front of the hump. Slide it back against
4 4
Place log #4 on top of the left side of log #2. The bottom of this log has a slot in it
Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. S • 12/08
Figure 14.12 Top View Figure 14.12 Top View
Log #2 is the right burning log. The air
Figure 14.14 Top View Figure 14.14 Top View
Figure 14. 16 Top View Figure 14. 16 Top View
2 2
3 3
4 4
55