Heat & Glo 6000GLX-IPI-R Owner's Manual page 26

Top Vent - Vertical Termination
No Elbow
V = 40 ft. Max. (12.4 m)
1
V = 3 ft. Min. (914 mm)
1
Note: If installing a vertical vent/
termination off the top of the ap-
pliance, the fl ue restrictor should
be used.
Figure 7.6
26
V
1
Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. S • 12/08
Flue Restrictor Instructions
1. Remove the top piece of refractory, if already installed.
See Figure 7.7.
TOP
REFRACTORY
Figure 7.7
2. Break the fl ue restrictor into two pieces. Do this by
bending the part back and forth until it breaks (see
Figure 7.8).
BREAK
HERE
Figure 7.8 Flue Restrictor
FLUE
RESTRICTOR