Transpose (Trans); Hold Pedal - Roland Fantom Quick Start Manual

Try Out the Various Performance Features

Transpose (Trans)

On the PLAY screen of each mode, you can transpose the pitch of the keyboard in
semitone steps, over a range of G–F# (-5– +6 semitones) by adjusting the Transpose
parameter's value.
Press [CURSOR] to move the cursor to "Trans" in the upper part of the screen, and
turn the VALUE dial or press [INC] or [DEC] to change its setting.
fig.Q-35

Hold Pedal

If an optional pedal switch (DP-2, DP-6, etc.) is connected to the rear panel HOLD
PEDAL jack, you can press the pedal switch to cause notes to sustain or "hold" even
after their keys have been released.
fig.Q-36
28
For details, refer to
"Transposing the Keyboard
in Semitone Steps
(Transpose)" (Owner's
Manual; p. 36).