Reset; Whites Setting; Calibration Lock Out; Zoom Limit Setting - Chauvet COLORado Zoom Tour WW User Manual

Operation

Reset

Whites Setting

Calibration Lock
Out
Zoom Limit
Setting
-12-
This setting allows you to reset the COLORado™ Zoom Tour WW to the default values.
1. Go to SET main level.
2. Select REST.
3. When PASS shows, press <ENTER>.
4. Enter the master access password as shown in
5. Wait for the reset process to finish.
This setting allows you to select and edit the temperature of the white colors used in
channel 2 (Macros) when in the STD.P mode.
1. Go to CAL1 main level.
2. Select a white color (WH.01~05).
3. Select a color (C. or W.).
4. Select a color value (000~255).
5. Repeat for the other colors.
If the product does not let you select step #3, follow the procedure described below
in Calibration Lock Out.
This setting enables you to activate or disable the White setting lock out feature, which
keeps non-authorized personnel from changing the product's settings.
1. Go to the SET main level.
2. Select CALE.
3. Select YES or NO.
This setting allows you to limit the zoom range using 3 different modes.
Basic mode is the default setting and allows the zoom to be moved full range (0~255) and
has no adjustable limit.
Position 1 and position 2 modes allow you to set limits on how far the zoom moves.
1. Set the mode to be used:
a. Go to the SET main level.
b. Select ZOOM
c. Select a mode (BASE, POS.1, or POS.2).
2. Set the limit for each mode:
a. Go to the ZOOM main level.
b. Select a mode (POS.1 or POS.2).
c. Select a zoom limit value (000~255).
Control Panel Lock.
COLORado™ Zoom Tour WW User Manual Rev. 06