Lenovo ThinkPad T420 User Manual page 81

Table 4. Modem result codes (continued)
+MRR: 24000
56
+MRR: 26400
57
+MRR: 28800
58
CONNECT 16800
59
CONNECT 21600
61
CONNECT 24000
62
CONNECT 26400
63
CONNECT 28800
64
+DR: ALT
66
+DR: V.42B
67
+DR: NONE
69
+ER: NONE
70
+ER: LAPM
77
+MRR: 31200
78
+MRR: 33600
79
+ER: ALT
80
LINE IN USE
83
CONNECT 33600
84
CONNECT 31200
91
+MCR: B103
134
+MCR: B212
135
+MCR: V21
136
The modem has connected to the line at 24000 bps and carrier
reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 26400 bps and carrier
reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 28800 bps and carrier
reporting is enabled. (See S95 and Xn.)
The modem has connected to the line, the DTE speed is 16800 bps
and DTE speed reporting is enabled.
The modem has connected to the line, the DTE speed is 21600 bps
and DTE speed reporting is enabled.
The modem has connected to the line, the DTE speed is 24000 bps
and DTE speed reporting is enabled.
The modem has connected to the line, the DTE speed is 26400 bps
and DTE speed reporting is enabled.
The modem has connected to the line and either the line speed is
28800 bps and DCE speed reporting is enabled, or the DTE speed is
28800 bps and DTE speed reporting is enabled.
The modem has connected to the line in MNP Class 5 and +DR:
message reporting is enabled. (See S95, Wn, and Xn.)
The modem has connected to the line in V.42 bis and +DR: message
reporting is enabled. (See S95, Wn, and Xn.)
The modem has connected to the line without data compression and
+DR: message reporting is enabled. (See S95, Wn, and Xn.)
The modem has connected to the line without any form of error
correction and the +ER: message reporting has been enabled. (See
S95, Wn, and Xn.)
The modem has connected to the line in V.42 LAPM error correction
mode and +ER: message reporting has been enabled. (See S95,
Wn, and Xn.)
The modem has connected to the line at 31200 bps and carrier
reporting is enabled. (See S95 and Xn.)
The modem has connected to the line at 33600 bps and carrier
reporting is enabled. (See S95 and Xn.)
Sent when the modem has connected in the MNP mode of error
correction, and +ER: message reporting has been enabled. (See
S95, Wn, and Xn.)
The modem attempted to go off-hook when an extension was
already occupying the line.
The modem has connected to the line, the DTE speed is 33600 bps
and the DTE speed reporting is enabled.
The modem has connected to the line DTE speed is 31200 bps and
the modem is to report the DTE speed upon connecting.
The modem has connected to the line with Bell 103 modulation and
modulation reporting is enabled. (See +MR, S95 and Xn.)
The modem has connected to the line with Bell 212 modulation and
modulation reporting is enabled. (See +MR, S95 and Xn.)
The modem has connected to the line with ITU-T V.21 modulation
and modulation reporting is enabled. (See +MR, S95 and Xn.)
.
Chapter 2 Using your computer
63