Config Menu; Date And Time Menu; Security Menu - Lenovo ThinkPad T420 User Manual

8. Select Restart. Move the cursor to the option you want for restarting your computer; then press Enter.
Your computer restarts.

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup menu.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• In each submenu, press Enter key to show selectable options and select a desired option by using cursor
key, or type desired values from the keyboard directly.
The following submenu is displayed:
• Network: Set the LAN related functions.
• USB: Enable or disable USB related functions.
• Keyboard/Mouse: Set the keyboard and the mouse related functions.
• Display: Specify the settings for display output.
• Power: Set power management related functions.
• Beep and Alarm: Enable or disable the audio related functions.
• Serial ATA (SATA): Specify the settings for the hard disk drive.
• CPU: Specify the settings for the CPU.
• Intel AMT: Set the Intel AMT related functions.

Date and time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change-date or time.
2. Press Tab, Shift Tab, or Enter to select a field.
3. Type the date or time.
Note: Another way to adjust date and time is press the "–" or "+" key.

Security menu

If you need to set the security features of your computer, select Security from the ThinkPad Setup menu.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• In each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following submenu is displayed:
• Password: Set password related functions.
178
User Guide