Using The Touch Pad - Lenovo ThinkPad T420 User Manual

Customizing the TrackPoint
You can customize the TrackPoint pointing device and its buttons as follows:
• Switch the functions of the left and right buttons.
• Change the sensitivity of the TrackPoint.
• Enable the Press-to-Select function.
• Enable the Magnifying Glass.
• Enable the TrackPoint scrolling function.
• Enable the TrackPoint Scrolling Tips.
To customize the TrackPoint, do as follows:
1. Press Fn+F8. A panel for UltraNav Device Settings pops up.
2. Click Manage Settings to open the Mouse properties window.
3. Click the UltraNav tab. Under TrackPoint, proceed to changing the settings.
For details, refer to the Help in the Utility.
Changing the cap
The cap (1) on the end of the TrackPoint pointing stick is removable. You can replace it as shown in the
drawing.
Note: If you replace the keyboard, a new keyboard is shipped with the default cap. If you wish, you can
keep the cap from your old keyboard and use it on the new one.

Using the touch pad

The touch pad consists of a pad (1) and two click buttons below the TrackPoint buttons at the bottom of the
keyboard. To move the pointer (4) on the screen, slide your fingertip over the pad in the direction in which
you want the pointer to move. The functions of the left (3) and right (2) click buttons correspond to those of
the left and right mouse buttons on a conventional mouse.
.
Chapter 2 Using your computer
35