Lenovo ThinkPad T420 User Manual page 73

Table 3. Modem command list (continued)
W W W
Connect Message Control
X X X
Extended Result Codes
&C &C &C RLSD Behavior
W W W [<value>]
X X X <value>
&C[<value>] &C &C
<value>
0: Upon connection, the modem
reports only the DTE speed.
Subsequent responses are
disabled.
1: Upon connection, the modem
reports the line speed, the
error correction protocol, and
the DTE speed, respectively.
Subsequent responses are
disabled.
2: Upon connection, the
modem reports the DCE speed.
Subsequent responses are
disabled.
3: Upon connection, the modem
reports DCE speed and the error
correction protocol.
<value>
0: CONNECT result code is
given upon entering online
data state. Dial tone and busy
detection reporting are disabled.
1: CONNECT <text> result code
is given upon online data state.
Dial tone and busy detection
reporting are disabled.
2: CONNECT <text> result code
is given upon entering online
data state. Dial tone detection
reporting is enabled, and busy
detection reporting is disabled.
3: CONNECT <text> result code
is given upon entering online
data state. Dial tone detection
reporting is disabled, and busy
detection reporting is enabled.
4: CONNECT <text> result code
is given upon entering online
data state. Dial tone and busy
detection reporting are both
enabled.
<value>
0: RLSD is always ON.
1: RLSD follows the state of the
carrier.
.
Chapter 2 Using your computer
55