Wired Enable (For Hl-3070Cw Wired Network Only); Wlan Enable (For Hl-3070Cw Wireless Network Only); Ses/Wps Or Aoss (For Hl-3070Cw Wireless Network Only) - Brother HL-3040CN Network User's Manual

Wired Enable (For HL-3070CW wired network only)

If you want to use the wired network connection, set Wired Enable to On.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
Press + or - to choose Wired LAN.
Press OK.
d
Press + or - to choose Wired Enable.
Press OK.
e
Press + or - to choose On or Off.
Press OK.

WLAN Enable (For HL-3070CW wireless network only)

If you want to use the wireless network connection, set WLAN Enable to On.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Enable.
Press OK.
e
Press + or - to choose On.
Press OK.

SES/WPS or AOSS (For HL-3070CW wireless network only)

If your wireless access point/router supports either SecureEasySetup, Wi-Fi Protected Setup (PBC
AOSS™, you can configure the machine easily without a computer. Your Brother machine has the
SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode your access
point uses, SecureEasySetup, Wi-Fi Protected Setup or AOSS™. By pushing a button on the wireless access
point/router, you can setup the wireless network and security settings. See the user's guide for your wireless
access point/router for instructions on how to access one-push mode. (See Wireless configuration using
SES/WPS or AOSS from the control panel (For HL-3070CW) in Chapter 6.)
1
Push Button Configuration
Control panel features
8
8
8
8
1
) or
64