Brother HL-3040CN Network User's Manual page 45

j
Connect the Brother wireless device to your access point using a network cable and click Next.
k
Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point
and the machine are powered on, and then click Refresh.
Note
• The default node name is "BRNxxxxxxxxxxxx".
• You can find your printer's MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 70.
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
5
35