Bushnell ImageView 111026 Instruction Manual page 7

available operating modes listed in the chart below. Briefly pressing the MODE button
will step through these operational modes in the listed order, and you will see the icon
for each mode on the display. Use the SNAP button to perform the operation after
selecting the icon. if you don't press SNAP within 5 seconds, the camera will return to its
normal operation and display.
Mode Icon
Self-timer Clock
Video Movie
Camera
Description
Photo is taken after a 10 second delay when SNAP is pressed (in
normal still photo mode.) this can be used to avoid accidently
shaking the camera when the SNAP button is pressed. the timer
automatically cancels after use.
Select the movie camera icon, then begin shooting by pressing
SNAP. the counter will show the elapsed time while recording
the video clip. the camera will continue recording video until
you stop it by pressing SNAP again, or until there is no more
memory available to store it (whichever occurs first). the counter
will advance by one, indicating the video file has been saved.
the camera automatically returns to normal still photo mode
after a video has been shot. Video resolution=640x480 pixels per
frame@25 fps
7