Advertisement
Cleaning and Storage
We recommend that the heater be cleaned at least once a month and before
off-season storage.
• Turn the heater OFF at the main switch and unplug it. Allow it to cool.
• Use a dry cloth to clean the external surfaces of the heater.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION
• Clean your heater using the above-mentioned steps, then disassemble and
pack the heater in its original container and store it in a cool, dry place.
• The motor is factory lubricated and will require no further lubrication.
10
Troubleshooting
If the heater fails to operate
• Be sure it is plugged in and that the AC outlet is working. Check circuit breaker
in case of a blown circuit.
• Check for any obstruction. If you find an obstruction, turn the Power Selector
dial to the OFF position. Unplug the heater and wait at least ten minutes for it to
cool. Carefully remove the obstruction. Plug the heater back in and restart it as
described under OPERATING INSTRUCTIONS.
• If the heater still does not operate, remove the power cord from the AC outlet
and have the heater service by authorized SI products service personnel.
1 1
Advertisement
