Download Print this page

Important Safety Instructions - Sharper Image EVSI-HTR30 Instruction Manual And Warranty Information

Fan-forced whole room heater

Advertisement

Thank you for purchasing The Sharper Image
This product, along with the entire The Sharper Image
innovation with cutting-edge design to provide you with years of dependability
and enjoyment.

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE
PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
DANGER
- TO REDUCE THE RISK OF ELECTRIC SHOCK:
• The output of this heater may vary and its temperature may become intense enough
to burn exposed skin. Persons with reduced sensitivity to heat or an inability to react
to avoid burns should not use this device.
• Individuals with diabetes should not use this device.
• Always unplug the appliance from the electrical outlet immediately after using and
before cleaning.
• Keep cord away from heated surfaces.
• DO NOT place the heater near a bed because objects such as pillows or blankets
can fall off the bed and be ignited by the heater.
• DO NOT reach for an appliance that has fallen into water. Unplug it immediately.
• DO NOT use while bathing or in the shower.
• DO NOT place or store appliance where it can fall or be pulled into a tub or sink.
• DO NOT place in or drop into water or other liquid.
• DO NOT leave heater unattended while ON.
• DO NOT use heater while sleeping.
®
Fan-Forced Whole Room Heater.
®
collection, connects
2
• NEVER use pins or other metallic fasteners with this appliance.
Caution: All
servicing of
• Keep dry - DO NOT operate in a wet or moist condition.
this product
• This appliance is designed for personal, non-professional use only.
must be
• Do not use attachments not recommended by The Sharper Image;
performed
specifically any attachments not provided with the unit.
by
• Check your heater cord and plug connections.
authorized
a) Faulty wall outlet connections or loose plugs can cause the outlet
SI Products
or plug to overheat. Be sure the plug fits tight in the outlet.
Service
b) This heater draws 12.5 amps during operation. To prevent
Personnel
overloading a circuit, do not plug the heater into a circuit that
only.
already has other appliances working.
• CAUTION: It is normal for the plug to feel warm to the
touch; however, a loose fit between the AC outlet
(receptacle) and plug may cause overheating and
distortion of the plug. Contact a qualified electrician to
replace loose or worn outlet.
WARNING
- TO REDUCE THE RISK OF BURNS,
ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS:
• This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surface. If provided, use handles when moving
this heater. Keep combustible materials such as furniture, pillows,
bedding, papers, clothes and curtains at least three feet from the
front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near
children or invalids and whenever the heater is left operating and
unattended.
• Always unplug the heater when not in use.
• Do not operate the heater with a damaged cord or plug, or after
the heater malfunctions, has been dropped or damaged in any
manner. Discard the heater or return to SI Products Service facility
for examination, electrical or mechanical adjustment, or repair.
3

Advertisement

loading