Download Print this page

Sharper Image EVSI-HTR30 Instruction Manual And Warranty Information

Fan-forced whole room heater

Advertisement

Quick Links

ONE YEAR LIMITED WARRANTY
SI PRODUCTS sells its products with the intent that they are free of defects in manufacture and
workmanship for a period of one year from the date of original purchase, except as noted below.
SI PRODUCTS warrants that its products will be free of defects in material and workmanship under
normal use and service. This warranty extends only to consumers and does not extend to Retailers.
To obtain warranty service on your SI PRODUCTS product, mail the product and your dated sales receipt
(as proof of purchase), postpaid, to the following address:
SI PRODUCTS
Return Center
43155 W. Nine Mile Road Suite 3
Novi, MI 48375
No COD's will be accepted.
SI PRODUCTS does not authorize anyone, including, but not limited to, Retailers, the subsequent
SI Products
consumer purchaser of the product from a Retailer or remote purchasers, to obligate SI PRODUCTS in any
Service Center
way beyond the terms set forth herein. This warranty does not cover damage caused by misuse or abuse;
accident; the attachment of any unauthorized accessory; alteration to the product; improper installation;
1.888.856.6781
unauthorized repairs or modifications; improper use of electrical/power supply; loss of power; dropped
product; malfunction or damage of an operating part from failure to provide manufacturer's recommended
8:30a.m. – 7:00p.m. (EST)
maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use
M – F
during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other
conditions whatsoever that are beyond the control of SI PRODUCTS.
Mail To: SI Products
This warranty is effective only if the product is purchased and operated in the country in which the
Return Center
product is purchased. A product that requires modifications or adoption to enable it to operate in any
43155 W. Nine Mile Road
other country than the country for which it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications is not covered under this warranty.
Suite 3
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE
Novi, MI 48375
SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITH
e-mail:
RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. SI PRODUCTS SHALL HAVE NO LIABILITY FOR
cservice@siproducts.com
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTY
REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE
DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY.
NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE,
SI PRODUCTS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR
REPLACEMENT.
This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed
products, including but not limited to sale of such products on Internet auction sites and/or sales of such
products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and
terminate as to any products or parts thereof which are repaired, replaced, altered, or modified, without
the prior express and written consent of SI PRODUCTS.
This warranty provides you with specific legal rights. You may have additional rights which may vary from
state to state. Because of individual regulations, some of the above limitations and exclusions may not
apply to you. For more information regarding our product line in the USA,
please visit: www.siproducts.com
THE SHARPER IMAGE
SI Products, LLC under license. ©The Sharper Image. All rights reserved.
®
name and logo are registered trademarks. Marketed and distributed by
IB-EVSI-HTR30
FAN-FORCED
WHOLE ROOM HEATER
Instruction Manual and
Warranty Information
EVSI-HTR30

Advertisement

loading

Summary of Contents for Sharper Image EVSI-HTR30

  • Page 1 For more information regarding our product line in the USA, please visit: www.siproducts.com Instruction Manual and THE SHARPER IMAGE ® name and logo are registered trademarks. Marketed and distributed by Warranty Information EVSI-HTR30 SI Products, LLC under license. ©The Sharper Image. All rights reserved. IB-EVSI-HTR30...
  • Page 2: Important Safety Instructions

    Faulty wall outlet connections or loose plugs can cause the outlet ® This product, along with the entire The Sharper Image collection, connects SI Products or plug to overheat. Be sure the plug fits tight in the outlet.
  • Page 3: Technical Specifications

    SAVE THESE IMPORTANT INSTRUCTIONS • This heater is not intended for use in bathroom, laundry areas and similar moist indoor locations. Never locate heater where it may fall into a bathtub or other water FOR EASY REFERENCE container. • Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances. Arrange cord away TECHNICAL SPECIFICATIONS from traffic areas where it can be tripped over.
  • Page 4 Main Features on the Fan-Forced Whole Room Heater CAUTION: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug.
  • Page 5: Operating Instructions

    OPERATING INSTRUCTIONS 3. Adjustable Thermostat • The heater has an Adjustable Thermostat feature that allows the user to set and maintain a desired temperature from Low to High. Turning the Unit On • To adjust temperature, turn the Adjustable Thermostat dial to the desired • Check that neither the appliance nor the power cord has been damaged . temperature. • Place the heater on a firm level surface. • The thin bar on the far left of the Adjustable Thermostat indicates the lowest • Connect the power cord into a standard AC outlet. The heater will beep twice temperature; the wide bar on the far right indicates the highest temperature. to confirm the connection. • Once the desired temperature is reached, the heater will automatically shut off and will turn on again when the temperature in the room drops below the 1.
  • Page 6: Cleaning And Storage

    Cleaning and Storage Troubleshooting If the heater fails to operate We recommend that the heater be cleaned at least once a month and before off-season storage. • Be sure it is plugged in and that the AC outlet is working. Check circuit breaker • Turn the heater OFF at the main switch and unplug it. Allow it to cool. in case of a blown circuit. • Use a dry cloth to clean the external surfaces of the heater. • Check for any obstruction. If you find an obstruction, turn the Power Selector dial to the OFF position.