CONTENTS Important Safety Instructions .............................4 Safety Features ..................................10 Controls......................................11 How to Use ....................................12 Cleaning ......................................13 Storage ......................................14 Reset Heater ....................................15 Troubleshooting ..................................16 Warranty.....................................18 English...
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions.
Page 4
age and younger and anyone with reduced physical, sensory, or mental capabilities, and whenever the heater is left operating and unattended. Children should be supervised to ensure that they do not play with the appliance, its parts and packaging material. INSTALLATION WARNING—To reduce risk of fire, electrical shock and injury to persons, observe the following: - A heater has hot and arcing or sparking parts inside.
Page 5
- This appliance, power supply, power cord and plug cannot come into contact with water. Do not use this product on wet surfaces. Do not use this product in a bathtub or shower or position product where it may fall into a bathtub, shower, laundry, swimming pool or other water container.
Page 6
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. - Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
Page 7
exhaust opening as this may cause an electric shock or fire, or damage the heater. - Check your heater cord and plug connections. A loose fitting outlet can cause the plug to overheat or cause a fire. Be sure plug fits tight in the outlet.
Page 8
the same time, your home circuit breaker or fuse may have tripped due to an overload of power. Consider only running your heater on the “low” setting, only running one heater at once and unplugging all other electrical products while running the heater, and/or hiring an electrician to install an additional circuit to your home’s electrical system.
SAFETY FEATURES COOL-TOUCH CABINET The outer housing is safe to touch even on high heat setting. AUTOMATIC SAFETY SHUT OFF SYSTEM If airflow becomes blocked the power to the heater is shut off to prevent overheating. AUTOMATIC TIP-OVER PROTECTION If the heater tips over, the safety shut-off system cuts power to heater.
HOW TO USE Before use, check the heater for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact Consumer Service. 1. Position heater so airflow is not obstructed. 2. Plug power cord into standard grounded wall outlet. 3.
Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended on a weekly basis. If service is required, return your heater to Sharper Image. (See WARRANTY for instructions.) NOTE: Do not modify the product with any aftermarket accessory.
STORAGE During the off-season or after extended periods of non-use, you may choose to store your heater. To ensure long life of the product, it is recommended to store your heater by following these instructions: TIP: Cleaning is recommended before and after storage. 1.
5. Turn the unit on by turning the dial on top of the unit to your desired heat setting or fan-only mode. Your Sharper Image Heater should now function normally. If the heater and other electrical products suddenly stop working at the same time, your home circuit breaker or fuse may have tripped due to an overload of power.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND SOLUTION The unit fails to Unit is not plugged in. Plug power cord into electrical power on. outlet. Household circuit breaker has tripped or blown fuse. Reset circuit breaker or replace fuse. See IMPORTANT INSTRUCTIONS. Ground fault circuit interrupter (GFCI) has tripped.
Page 16
PROBLEM POSSIBLE CAUSE AND SOLUTION Unit is powered Ensure heater is not set to Fan Only mode. If problem but there is no persists, unit may be damaged or in need of repair. heat. Cease usage and unplug. Contact Consumer Service for assistance.
(1) year from the date of purchase. If any such defect is discovered within the warranty period, Sharper Image, at its discretion, will repair or replace the Product at no cost. For warranty or repair service: Call 833-800-8669 or email help@sihomecomfort.com to obtain a Return Authorization (“RA”) form.
Page 18
Sharper Image® name and logo are registered trademarks. Manufactured, marketed and distributed under license by Vornado Air LLC, Andover, Kansas 67002. Manufactured in China. U.S. Patents Pending. Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002. English...