Troubleshooting; Cleaning And Storage - Sharper Image EV-HT20 Instruction Manual

TROUBLESHOOTING

If heater fails to operate
• Be sure it is plugged in and that the electrical outlet is working. Check circuit
breaker in case of blown circuit.
• Check for any obstruction. If you find an obstruction press POWER ON/OFF button
to turn the heater OFF. Unplug the heater and wait at least ten minutes for it to
cool. Carefully remove the obstruction. Plug the heater back in and restart it as
described under OPERATION.
• If heater still does not operate, remove the plug from the socket and have the
appliance serviced by authorized service personnel only.

CLEANING AND STORAGE

We recommend that the heater be cleaned at least once a month and before off-
season storage.
– Turn the heater OFF and unplug it. Allow it to cool.
– Use a dry cloth to clean the external surfaces of the heater.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.
– Clean your heater using the above-mentioned steps, then pack the heater in its
original container and store it in a cool dry place.
– This heater does not disassemble.
– The motor is factory lubricated for life and will require no further lubrication.
11