Outside Calls; Making An Outside Call; Answering An Outside Call; Universal Answer - Samsung DS 24D User Manual

DS 24D KEYSET
32 CHARACTER DISPLAY
Two lines with 16 characters each.
DS 24D
1 2
5
4
GHI
7 8
PRS
0
Volume
TRANSFER KEY
8 PROGRAMMABLE KEYS WITH
TRI-COLORED LIGHTS
Keys 1-3 (1-6) are automatically
VOLUME CONTROL KEYS
assigned as Direct Trunk keys. Key
Used to set independent
#8 is a message key, by default.
levels for handset, speaker,
Although all 8 keys may be
background music, ring
programmed for any system
and page volumes.
features/functions.
SOFT KEYS
Used to activate
features via the
display.
Scroll
SCROLL KEY
Used to scroll
through displays.
3
ABC DEF
SPEAKER
6
For handsfree
JKL MNO
operation and
ringing.
9
TUV WXYZ
Transfer Redial Hold Speaker
SPEAKER KEY
REDIAL KEY
HOLD KEY
MICROPHONE
For handsfree operation.
16 PROGRAMMABLE KEYS WITH
TRI-COLORED LIGHTS
Used to call stations directly, to indicate
busy conditions of other stations, for
One Touch dialing and many other
system features.

OUTSIDE CALLS

MAKING AN OUTSIDE CALL

• Lift the handset and press an idle outside line button, line group button
or dial a line access code to receive dial tone—OR—press an idle out-
side line button, line group button or dial a line access code to receive
dial tone through the speaker—OR—press SPEAKER, receive intercom
dial tone and dial a line access code.
• Dial the telephone number.
• Finish the call by replacing the handset or pressing the SPEAKER key.
NOTE: You will receive No More Calls tone when you attempt to make a call
and there is no key available for that line.
• If Least Cost Routing is enabled on your phone system, this button may
be labeled LCR or accessed by dialing an access code (usually 9).
• If your system is programmed to require an authorization code before
making a call, dial
• If your system is programmed to require an account code before mak-
ing a call, press the ACCT button or dial 47 plus a valid code, press the
ACCT button again and then select a C.O. line.
For more information on authorization and account codes, see your system
administrator.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before dialing.

ANSWERING AN OUTSIDE CALL

• Lift the handset and you are automatically connected to the ringing call.
See Ring Preference under Customizing Your Keyset—OR—press the
SPEAKER key to automatically answer on the speakerphone.
NOTE: If a call is flashing at your keyset but not ringing, you must press the
flashing button to answer.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To
answer calls ringing this device, dial 67 or press the UA key. This device can
operate in the Day or Night mode.
5 6
plus a valid code before selecting a C.O. line.