Installing The Display Closure Sensor - Dell Latitude XT3 Owner's Manual
Tablet pc
Hide thumbs
Also See for Latitude XT3:
- Owner's manual (147 pages) ,
- Manual (108 pages) ,
- Setup manual (32 pages)
Table of Contents
Advertisement
10. Remove the display closure sensor from the computer.
Installing the Display Closure Sensor
1.
Place the display closure sensor in the compartment.
2.
Tighten the screw to secure the display closure sensor to the system board.
3.
Connect the display closure sensor flex cable to the system board.
palm rest .
4.
Replace the
base cover .
5.
Replace the
hard drive assembly .
6.
Replace the
keyboard .
7.
Replace the
keyboard trim .
8.
Replace the
back panel .
9.
Replace the
battery .
10. Replace the
11. Follow the procedures in
70
After Working Inside Your Computer.
Advertisement
Table of Contents
