Procedure For Using Administrator Settings - Sharp MX-M350U Operation Manual

Procedure for using administrator settings

The procedure for configuring an administrator setting is explained below.
1 Press the [SYSTEM SETTINGS] key.
SYSTEM
B STATUS SETTINGS
2 Touch the [ADMINISTRATOR SETTINGS]
key.
DEFAULT
LIST PRINT
SETTINGS
FAX DATA
SENDER CONTOROL
RECEIVE/FORWARD
ADMINISTRATOR SETTINGS
3 Use the numeric keys to enter the five-digit
administrator password.
ADMINISTRATOR PASSWORD
Supplementary explanation of key operation for administrator settings
SYSTEM SETTINGS
INTERFACE SETTINGS
HEXADECIMAL DUMP MODE
A
ENABLE USB PORT
ENABLE NETWORK PORT
A Check mark boxes are touch keys that show the status of selections. A box with a check mark means the function
is "on" (enabled) and an unchecked box means the function is "off" (disabled). Alternate touches of a box will
change the on/off status.
B The name of the setting category or particular item to be set will appear on the touch key. A touch of the key will
select the item displayed.
C If the settings continue on the following screen (s), touch the
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
The factory default
setting for the
administrator password
is indicated on page 2 of
the administrator settings
guide.
I/O TIMEOUT
USB PORT EMULATION
SWITCHING
NETWORK PORT EMULATION
SWITCHING
B
and
8-3
ADMINISTRATOR SETTINGS
4 Touch the [PRINTER SETTINGS] key.
PRINTER
SETTINGS
CHANGE ADMIN
PASSWORD
setting explanations on
and then follow these steps to select a setting for
the setting.
5 Make desired settings for the selected
setting.
Select the desired setting from the settings shown
on page 8-2.
Detailed descriptions for settings start on the next
page.
6 When you have finished configuring
settings, touch the [OK] key and then the
[Exit] key.
EXIT
OPERATION
SAVE
SETTINGS
1/2
K PRINTER
GS SETTINGS
These keys and indicator are
available on setting screens that
require the entry of numerical
values.
OK
1/2
20
C
AUTO
AUTO
and keys to move back and forth through
keys.
Follow these steps to
select the setting that
you wish to use.
In the following steps,
the setting screens for
the selected setting will
appear. Refer to the
page 8-5 and following,
Exit the administrator
settings.
(1 999)
20
D E