Configuring The Operation Condition Settings; G Basic Procedure For Operation Condition Settings; That Can Be Configured From The Operation Panel) - Sharp AR-C260P Operation Manual

CONFIGURING THE OPERATION CONDITION SETTINGS

The operation condition settings are used to configure basic printing settings. The following settings are available.
DEFAULT SETTINGS.........Basic settings used in printing (page 3-4)
PCL SETTINGS ..................Sets the PCL symbol set and fonts (page 3-5)
Print PS errors* ...................Sets whether a PostScript error page is printed or not when a PostScript error has
(PostScript settings)
* An optional PS3 expansion kit is needed.
Basic procedure for operation condition settings
(settings that can be configured from the operation panel)
Press the [MENU] key repeatedly until
1
"SET OPERATING CONDITIONS" appears.
Press the [OK] key.
2
3 Press the or
setting appears.
4 Press the [OK] key.
3-2
occurred. (page 3-6)
Any print jobs held in the
printer and any jobs
currently being
transmitted to the printer
will be printed using the
previous operation
condition settings.
key until the desired
Press the or
5
selection for the setting appears.
For information on the selections for each setting,
see the explanations on page page 3-3 and
following.
Press the [OK] key.
6
When you have finished configuring the
7
settings, press the [MENU] key to return to
the initial screen.
NOTE
The [BACK/C] key can be used to move back to the
previous setting level. This is useful if you
accidentally select the wrong setting.
key until the desired
" " will appear to the
right of the selection and
the selection will be
stored. To configure
another setting, press
the [BACK/C] key to
return to step 3 and
repeat the procedure
through step 6.