1
BEFORE USING THE MACHINE
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
When a finisher is
installed
(1)
Finisher / saddle stitch finisher*
This can be used to staple output. The saddle stitch
finisher can automatically staple output at the center line
and fold the pages to create a pamphlet.
☞
FINISHER / SADDLE STITCH FINISHER
(2)
Punch module*
This is used to punch holes in output.
☞
PUNCH MODULE
(3)
Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞
INSERTER
(page 58)
(4)
Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
PLACING THE ORIGINAL
* Peripheral device.
(1)
(page 49)
(page 57)
(page 44)
(2)
(3) (4)
(5)
(6)
(5)
Front cover (upper)
Open this to replace a toner cartridge or clear a paper
misfeed from the paper pass unit.
☞
REPLACING THE TONER CARTRIDGES
(6)
Front cover (lower)
Open this to switch the main power on and off.
☞
TURNING THE POWER ON AND OFF
☞
5. MAINTENANCE
(7)
Operation panel
This is used to select functions and enter the number of
copies.
☞
OPERATION PANEL
(8)
Right Tray
Output can be delivered to this tray.
(9)
Output tray (center tray)
Output is delivered to this tray.
5
(7) (8)
(9)
When a finisher /
saddle stitch finisher
is not installed
(page 62)
(page 10)
(page 71)
(page 16)