Multi-Monitor Support - HP Compaq dx6120 Series Quickspecs

QuickSpecs
Technical Specifications - Graphics
1
Resolutions Supported
1
Modes listed are supported with a single active display. The supported mode list for multiple active displays is a subset of this list.
Not all modes will support video playback and some supported modes may use software MC (motion compensation) rather than
hardware MC. Not all modes will support 3D acceleration depending on the system configuration (e.g., resolution selected, size of
frame buffer, number of installed memory modules, etc.).
NOTE: Other resolutions and refresh rates may be selectable but are not recommended.
NVIDIA Quadro NVS 280
Graphics Card
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x768
1280 x 960
1280 x 1024
1600 x 900
1600 x 1200
1920 x 1080
1920 x 1200
1920 x 1440
2048 x 1536
Form Factor
Graphic Controller
VGA controller
Bus type
RAMDAC
Memory
Connector
Dimensions
Controller clock speed
Color planes
Overlay planes
Maximum vertical refresh
rate
Maximum pixel clock

Multi-monitor support

Single DVI Support
Dual DVI Support
High-definition Video
Processor (HDVP)
DA - 12243 Worldwide — Version 21 — May 25, 2007
HP Compaq Business Desktop dx6120 Series
Analog Monitor
85
85
85
85
60
85
85
60
85
60
60
75
75
ATX
Integrated Quadro 280 2-D graphics processor unit (GPU)
Integrated into the Quadro GPU
Workstations: AGP 8X or PCI
Desktops: PCI
Dual 350 MHz
64 MB DDR with frame buffer and Texture storage
Single High-density Flex Connector
Low-profile, 2.586 x 6.6 in (6.57 x 16.76 cm)
275 MHz
32-bit color buffer
1 16-bit Video overlay plane
120 Hz
350 MHz
Dual analog or digital monitors
Yes
Yes
Full-screen, full-frame video playback of HDTV and DVD content
DVD-ready motion compensation for MPEG-2
Independent hardware color controls for video overlay
Hardware color-space conversion (YUV 4:2:2 and 4:2:0)
Maximum Refresh Rate (Hz)
Digital Monitor
70
70
70
70
70
70
70
70
60
-
-
-
-
Page 33