HP Compaq dx6120 Series Quickspecs page 30

QuickSpecs
Technical Specifications - Communications
Agere PCI 56K
International SoftModem
Network transfer rate
Environmental
Dimensions
Management capabilities ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
Data Transmission
NOTE: 56 Kbps technology refers to download speeds only and requires compatible modems at server
sites. Other conditions may limit modem speed. FCC limitations allow a maximum of 53 Kbps during
download transmissions.
Data Speeds
Data Standards
Fax Speeds
Fax Mode Capabilities
Error Correction and Data
Compression
Power Management
Upgradeability
Video
Optional Ring Wakeup
Signal
Operating Temperature
Operating Humidity
Power
Chipset
Dimensions (L X H)
Connection
Other Features
Safety
DA - 12243 Worldwide — Version 21 — May 25, 2007
HP Compaq Business Desktop dx6120 Series
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T, 1000 Mbps
Operating temperature
Operating humidity
6.4 x 4.8 x 0.8 in (16.3 x 12.1 x 1.9 cm)
56,000 Kbps maximum downstream data
(Upload only) 33,600/31,200/28,800/26,400/21,600/19,200/16,800/
14,400/12,000/9,600/7,200/ 4,800/2,400/1,200/300
ITU-T V.90, ITU-T V.34, V.44, V.42, V.42bis, V.32bis, V.32, V.29,v.23, V.22bis,
B.22, V.21, Bell 212A, and Bell 203J
14,400/12,000/9,600/7,200/4,800/2,400/300 b/s
ITU-T T.31 class 1 FAX, V. 17, V.29, V.27ter, and V.21 Channel 2
V.44, 42bis, V.42 and MNP2-5, LAPM
ACPI; PPMI 1.1 and wake support with PME and Vaux; meets PCI 3.0
requirements and PC 2001 requirements
Driver upgradeable for future enhancements
ITU-T V.80 video ready interface
TIA/EIA 602 standard AT command set
Integrated DTE interface with speeds of up to 115.2 Kbps, parallel 16550a
UART-compatible interface
32° to 158° F (0° to 70° C)
20% to 90%, non-condensing
Requires a 3.3-V auxiliary power rail on PCI bus
Uses only one PCI load (i.e., one grant/request pair), one shared IRQ, one
electrical load
Agere Systems SV92PP – Integrated PCI interface with 5-V tolerant buffers
Complies with PCI low profile specifications—6.7 x 2.3 in (17.0 x 5.8 cm) and
supports high- and low-profile brackets
Single RJ-11 connector
Digital line protection, support for high profile and low profile brackets, PnP ID
support
UL recognized to UL 1950, 3rd edition (U.S. and Canada); IEC 950 (TUV, NEMKO,
DEMKO, SEMKO); CE Mark, EC 950 (TUV, NEMKO, DEMKO, SEMKO, CE mark
32° to 131° F (0° to 55° C)
85% at 131° F (55° C)
Page 30