Olympus FL-300R Instructions Manual page 10

Wireless remote control fl ash photography Wireless remote control fl ash photography
1
Set the RC switch to A or B.
• A and B are the group settings. Set the fl ash control mode, etc. to each groups and
control them wirelessly.
2
Set [# RC Mode] to [On] in the menu of the camera to make the fl ash on the
camera ready to fi re.
3
Set the fl ash control mode
Group
• Select the fl ash
control mode and
adjust the fl ash
intensity individually.
For MANUAL, select
the fl ash intensity.
12
EN
etc. in each of the groups A and B on the camera.
,
Flash intensity value
A Mode
TTL +5.0
M 1/8
Off –
TTL +3.0
P 250 F5.6 0.0 0.0
250
Flash control Flash
mode intensity
Normal fl ash/Super FP fl ash
•
Communication light level
•
LO
Ch 1
Channel
38 38
•
Super FP fl ash is not compliant.
Set the communication light level to
[HI], [MID], or [LO].
Be sure to set the channel
to [1].