HP ProLiant DL380 Quickspecs page 57

QuickSpecs
Technical Specifications
System Inlet Temperature System Inlet Temperature Operating System Inlet Temperature System Inlet Temperature
Relative Humidity Relative Humidity Relative Humidity Relative Humidity
(non-condensing)
Altitude Altitude Altitude Altitude
Acoustic Noise Acoustic Noise Acoustic Noise Acoustic Noise
DA - 13234 North America — Version 44 — October 14, 2011
Maximum Peak Power
Non-operating
Operating
Non-operating
Operating
Non-operating
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
NOTE: NOTE: NOTE: The Listed sound levels apply to standard shipping configurations. NOTE:
Additional options may result in increased sound levels.
Idle Idle Idle Idle
LWAd
LpAm
Operating Operating Operating Operating
HP ProLiant DL380 Generation 6 (G6) HP ProLiant DL380 Generation 6 (G6) HP ProLiant DL380 Generation 6 (G6) HP ProLiant DL380 Generation 6 (G6)
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
1P SKU 1P SKU 1P SKU 1P SKU 2P SKU 2P SKU 2P SKU 2P SKU
4.1 B 4.7 B
22 dBA 28 dBA
1P SKU 1P SKU 1P SKU 1P SKU 2P SKU 2P SKU 2P SKU 2P SKU
Page 57