Removal and Replacement Procedures
5.9
RTC Battery
RTC Battery Spare Part Number Information
RTC battery (includes 2-sided tape)
1. Prepare the notebook for disassembly
2. Remove the Mini PCI communications card
3. Disconnect the RTC battery cable 1 from the system board.
4. Remove the RTC battery 2 from the system board. (The RTC
battery is attached to the system board with two-sided tape.)
Removing the RTC Battery
Reverse the above procedure to install the RTC battery.
5–18
(Section
(Section
Maintenance and Service Guide
384626-001
5.3).
5.8).