2-3.2 Sdram Memory Module Installation - SOYO SY-6IWM User Manual

Pentium iii, pentium ii & celeron, processor supported, fw82810 agp/pci/amr, 66/100/133 mhz front side bus supported, micro atx form factor

Hide thumbs Also See for SY-6IWM:

Table of Contents

Hardware Installation

SY-6IWM

2-3.2 SDRAM Memory Module Installation

ITE

Your board comes with three DIMM sockets, and supports up to 512MB main

memory using industry standard Synchronous DRAM (SDRAM), single or double-

sided, 3.3V unbuffered DIMM modules from 8MB to 256MB. Registered DIMMs

or DIMMs populated with 4 bit wide SDRAM devices are not supported. PC100

compliant DIMM module is required regardless of 66, 100 or 133 MHz FSB

speed.

Table of Contents