2-3.7 Quick Bios Setup - SOYO SY-6IWM User Manual

Pentium iii, pentium ii & celeron, processor supported, fw82810 agp/pci/amr, 66/100/133 mhz front side bus supported, micro atx form factor

Hide thumbs Also See for SY-6IWM:

Table of Contents

Hardware Installation

SY-6IWM

2-3.7 Quick BIOS Setup

This Motherboard does not use any hardware jumpers to set the CPU frequency.

Instead, CPU settings are software configurable with the BIOS [Soyo Combo

Feature]. The [Soyo Combo Feature] menu combines the main parameters that

you need to configure, all in one menu, for a quick setup in BIOS.

After the hardware installation is complete, turn the power switch on, then press

the <DEL> key during the system diagnostic checks to enter the Award BIOS

Setup program. The CMOS SETUP UTILITY will display on screen. Follow these

steps to configure the CPU settings.

SETUP UTILITY will display on screen. Then, follow these steps to

configure the CPU settings.

Step 1. Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to "Auto".

Step 2. Select [Load Optimized Defaults]

Select the "Load Optimized Defaults" menu and type "Y" at the prompt to load the

BIOS optimal setup.

Table of Contents