Unpacking The Motherboard - SOYO SY-6IWM User Manual

Pentium iii, pentium ii & celeron, processor supported, fw82810 agp/pci/amr, 66/100/133 mhz front side bus supported, micro atx form factor
Hide thumbs Also See for SY-6IWM:
Table of Contents

Advertisement

Hardware Installation
2-2

UNPACKING THE MOTHERBOARD

When unpacking the Motherboard, check for the following items:
u
The SY-6IWM FW82810 AGP/PCI/AMR Motherboard
u
This Quick Start Guide
u
The Installation CD-ROM
u
SOYO 3-in-1 Bonus Pack CD-ROM (Norton AntiVirus, Ghost
and Virtual Drive)
u
The Foldable URM (Universal Retention Mechanism) Set
(Factory installed on this motherboard)
u
One IDE Device ATA 66 Flat Cable
u
One Floppy Disk Drive Flat Cable
u
Serial port flat cable with a 9-pin connector bracket
Warning: Do not unpack the Motherboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged by
electrostatic discharge. To avoid permanent damage to components ground
yourself while working by using a grounding strap. Otherwise, ground yourself
frequently by touching the unpainted portion of the computer chassis to drain the
static charges.
Handle the Motherboard carefully, holding it by the edges. You are now ready to
start the installation.
18
SY-6IWM

Advertisement

Table of Contents
loading

Table of Contents