Table of Contents
Advertisement
HKTS 60BQ
Troubleshooting
This unit is designed for trouble-free operation. Most problems that users encounter are due to operating errors. So if you have a problem, first check this list for a possible solution.
If the problem persists, consult your authorized Harman Kardon service center.
Problem
If there is no sound from any of the speakers:
If there is no sound coming from one of the speakers:
If there is no sound coming from the center speaker:
You can find additional troubleshooting information in the FAQs link on the Support page at www.harmankardon.com.
Solution
Check that the receiver/amplifier is on and a source is playing.
Make sure that all wires and connections between the receiver/amplifier
and the speakers are connected properly.
Make sure that the speaker wires are not frayed, cut or punctured.
Review the proper operation of your receiver/amplifier.
Check that the balance control on your receiver/amplifier is not set all the way
to one channel.
Check your receiver/amplifier's speaker setup procedure to make sure that
the speaker in question has been enabled and its volume level has not been
turned all the way down.
Make sure that all wires and connections between the receiver/amplifier
and the speaker are connected properly.
Make sure that the speaker wires are not frayed, cut or punctured.
Check your receiver/amplifier's speaker setup procedure to make sure that
the center speaker has been enabled and its volume level has not been turned
all the way down.
Make sure that all wires and connections between the receiver/amplifier
and the center speaker are connected properly.
Make sure that the speaker wires are not frayed, cut or punctured.
If your receiver is operating in Dolby
center speaker is not set to Phantom.
12
Troubleshooting
®
®
Pro Logic
mode, make sure that the
Advertisement
Table of Contents
